SINO Magnetic Ring Type Pindle Rotary Encoder Lathes 10m 100m
Encoder Magnetic Rotary Encoder Application
Heavy lathes, Milling machine, Drilling, Grinder machine, EDM
(electrical discharge machine)
Machining Centers, PVC Cutting Machine, Wood Cutting Machine,
Glassworking machine, Material handling
Magnetic Encoder Scale Product Merits,
KA800MC-5 magnetic scale is mainly suitable for processing
The tape is composed of MB50 with a pitch of 5+5mm
SINO Magnetic Scale's Advantage:
It has strong ability of anti-severe environment, it won't be
dirtied or damaged owing to cooling water,
the cooling liquid, metal powder, or dust, anti-protection ability
is very strong.
Technical parameter
| Magnetic Scale Encoder |
| Reference signal | Each 5mm(C) |
| Pitch | 5mm |
| Ruler tape specifications | 5+5mm |
| Resolution | 5µm |
| Available Gap | 2mm |
| Accuracy | ± (0.035 + 0.02 x L)mm,L:effective measuring length,Unit:m |
| Cable | 5 core or 8 core |
| Output form | TTL or RS-422 |
| Gap between reading head and protective steel belt | 0.8～1.8mm |
| Supply voltage | 5VDC±5%,24VDC±5% |
| Current consumption (no load) | 40mAMAX |
| Current consumption (with load) | 120mAMAX(5V,RL=120Ω) |
| 60mAMAX(28V,RL =1.2kΩ) |
| Maximum speed | 5m/s(MS T 5) |
| Anti-vibration | 100m/s2[10Hz～2000Hz] |
| Impact resistance | 1000m/s2(11ms) |
| Protection level of reading head | IP 67 DIN 40050/IEC 529 |
| Operating temperature | -20℃～85℃ |
| Storage temperature | -20℃～85℃ |
| Humidity | 100％ Non-condensing |
| Electrical protection | Power polarity inversion protection, output short-circuit current
protection |
| Cable of Standard Head reader | 3m, LMAX=50m |
| Measurement length cable |
LMAX=100m
|
Detail image:
Why choose us?
Magnetic scale can be cut as your requirement
A fully-sealed read-head with the perfect structure of the profile
makes it match the IP67 protection class
Advanced technician and inner structure
Automatic gain control technician reduced the requirement for
installation, The gap between the reader and tape can be 3mm (5
microns)
Questions & Answer :
1, What’s the max measurement length?
Measurement length up to 100,000mm
2, What are the length 120mm~ 100000mm represent?
Answer: All these lengths mean table travel length ( table moving
size, NOT table size ) of the machine x y z-axis. You may need to
add an extra 5.5 each for the total length.
3, If I need a full set of 2 Axis dro with scales for my lathe
machine, how should I purchase them?
Answer: You can select, they are " 1pc 2 Axis dro " " Travel length
**mm of the linear encoder or magnetic encoder" " Travel length
***mm", then you will receive what you want.
4, My machine's x-axis moving length is 260mm, and y-axis moving
length is 530mm, can you offer this kind of length that is not
listed in the options?
Answer: Each scale measuring range has a 20mm increment. That means
the 250mm scale measuring range can reach up to 270mm. So you can
select the 270mm scale and 570mm scale for your machine.
5, If i only buy 1 piece scale separately, can I get the user
manual?
Answer: The user manual comes with DRO, But you can contact the
seller to get the download.
6, What should I choose for my lathe or mill?
Answer: The lathe usually is a 2 axis readout while the mill can be
either 2 axes or 3 axis
7, Can I cut the scale if it's too long for my machine?
Answer: Technicality NO. if you are a novice, otherwise, the scale
may probably be damaged and cannot be used
8, Are they all shipped by Fed Ex, UPS, DHL?
Answer: Yes. Standard FedEx support and others are available
